Livebox Mini + full routed = Aucune diffusion

Pour discuter de tout ce qui concerne la TV d'Orange

Livebox Mini + full routed = Aucune diffusion

Messagepar scarabaeus » 08 Jan 2010, 16:55

bonjour à tous,

j'ai mis à jour ma livebox avec le firmware qui va bien pour profité du full routed. Déja j'ai changé le réseau de ma livebox en 192.168.50.X, a première vu le décodeur se voit attribuer une IP du type 192.168.1.X (encore bien développé ce firmware), du coup j'attribue à mon décodeur via un serveur DHCP sous Linux une adresse de mon sous réseau.
J'ai également bien configurer la livebox en full routed et je l'ai redémarré.
Cependant le décodeur n'affiche pas l'heure (--:--) et lorsque que j'essai avec VLC sur un pc voici la trace de VLC:
Version du décodeur: IAD80
Windows 7 64 bits

Code: Tout sélectionner
main debug: incoming request - stopping current input
main debug: waitpipe: object killed
main debug: dying input
main debug: socket 1920 polling interrupted
main debug: prebuffering done 0 bytes in 5s - 0 kbytes/s
main error: cannot pre fill buffer
main warning: cannot create a stream_t from access
main debug: removing module "access_udp"
main debug: thread ended
main debug: dead input
main debug: thread times: real 0m5.925008s, kernel 0m0.000000s, user 0m0.000000s
main debug: processing request item udp://232.0.5.33:8208 node Bibliothèque skip 0
main debug: resyncing on udp://232.0.5.33:8208
main debug: udp://232.0.5.33:8208 is at 8
main debug: starting new item
main debug: creating new input thread
main debug: Creating an input for 'udp://232.0.5.33:8208'
main debug: thread (input) created at priority 1 (../.././src/input/input.c:230)
main debug: thread started
main debug: using timeshift granularity of 50 MBytes
main debug: using timeshift path 'C:\Users\pc-tour\AppData\Local\Temp'
main debug: `udp://@232.0.5.33:8208' gives access `udp' demux `' path `@232.0.5.33:8208'
main debug: creating demux: access='udp' demux='' path='@232.0.5.33:8208'
main debug: looking for access_demux module: 0 candidates
main debug: no access_demux module matched "udp"
main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating access 'udp' path='@232.0.5.33:8208'
main debug: looking for access module: 1 candidate
access_udp debug: opening server=:0 local=232.0.5.33:8208
main debug: net: opening 232.0.5.33 datagram port 8208
main debug: Multicast group join request
main debug: using access module "access_udp"
main debug: TIMER module_need() : 5.000 ms - Total 5.000 ms / 1 intvls (Avg 5.000 ms)
main debug: Using AStream*Block
main debug: pre buffering
qt4 debug: IM: Deleting the input
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
main debug: TIMER input launching for 'udp://239.192.2.44:8208' : 5945.000 ms - Total 5945.000 ms / 1 intvls (Avg 5945.000 ms)
qt4 debug: IM: Setting an input
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry


Je ne comprend pas d'ou cela provient.

Merci de votre aide
scarabaeus
 
Messages: 1
Inscription: 08 Jan 2010, 16:49

Retourner vers La TV Orange

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 20 invités

cron